Tianjin Jinjing Gas Compressor Manufacturing Co.,Ltd.
Get a quote
Home / All / Screw air compressor / Oil-injected air compressor / Permanent magnet VSD screw air compressor / 37 KW 8 bar Integrated Permanent Magnet VSD Screw Air Compressor

37 KW 8 bar Integrated Permanent Magnet VSD Screw Air Compressor

37 KW 8 bar Integrated Permanent Magnet VSD Screw Air Compressor
37 KW 8 bar Integrated Permanent Magnet VSD Screw Air Compressor37 KW 8 bar Integrated Permanent Magnet VSD Screw Air Compressor37 KW 8 bar Integrated Permanent Magnet VSD Screw Air Compressor37 KW 8 bar Integrated Permanent Magnet VSD Screw Air Compressor37 KW 8 bar Integrated Permanent Magnet VSD Screw Air Compressor37 KW 8 bar Integrated Permanent Magnet VSD Screw Air Compressor
Share
CategoriesPermanent magnet VSD screw air compressor
BrandJinjing Professional Air Compressor Manufacturer
Product SpecificationsJLV-37KW/8 Bar
ColorBlue Or Custom
Power37 kw 50 HP
Working Pressure8 Bar (0.8 Mpa)
Drive TypeIntegrated Permanent Magnet with Inverter Control
Size1500 * 950 * 1230 mm
Weight800 kg
FOB portTianjin
Terms of PaymentL/C, T/T
DownloadDownload pdfDownload xlsx
Detail Information

Product Overview


The JLV-37KW/8KG is a 50HP Rotary Screw Air Compressor built for factories that run continuous pneumatic operations. As a 37kW Direct Drive Screw Compressor, it eliminates belts and couplings by integrating a Baosi permanent magnet motor directly with the air end.

This is a Permanent Magnet VSD Air Compressor, meaning the Inovance CP650 controller adjusts motor speed to match your actual air demand in real time. Compared with fixed-speed units, it functions as a genuinely Energy Saving Screw Air Compressor, reducing power waste during periods of low air consumption.

As an Oil-Injected Rotary Screw Compressor, it delivers clean air with oil carryover at or below 2ppm. The integrated design also makes it a highly responsive Variable Speed Screw Compressor for factories with fluctuating demand, while the compact enclosure keeps it easy to install and maintain.
37-KW-8-bar-Integrated-Permanent-Magnet-VSD-Screw-Air-Compressor-800-6
37-KW-8-bar-Integrated-Permanent-Magnet-VSD-Screw-Air-Compressor-800-3
37-KW-8-bar-Integrated-Permanent-Magnet-VSD-Screw-Air-Compressor-800-2
37KW-50HP-8-bar-Integrated-Permanent-Magnet-Screw-Air-Compressor-With-Baosi-Motor-Inovance-Inverter

Advantages

1 Integrated PM design

The motor and air end are a single unit. There are no belts or couplings to wear out or adjust. You get full power transmission from the motor to the air end, which reduces energy waste and mechanical vibration.

2 Smart factory connectivity

The Inovance CP650 controller comes with RS485 and Modbus protocols. You can connect it to your factory PLC or DCS system to monitor pressure, temperature, and running status, and to start or stop the machine remotely.

3 Genuine core components

The machine uses a Baosi YNE138RB permanent magnet motor and air end, paired with an Inovance inverter. These are standard, off-the-shelf industrial brands, so spare parts and service are easy to source.

4 Clean air output

The oil separation system and W962 oil filter keep oil carryover at or below 2ppm. This protects downstream equipment such as laser cutters, valves, and pneumatic tools.

5 Cooling for demanding conditions

A 780x700x80mm radiator and a YWF4D630BC axial fan keep operating temperatures stable, even in hot workshops or during long continuous runs.

6 Compact footprint

The enclosure measures 1500 x 950 x 1230 mm. It fits into tight compressor rooms while still allowing full access to service points.

7 Easy maintenance

The air filter, oil filter, oil separator, and oil level sight glass are positioned behind wide-access doors. Routine service takes minutes, not hours.

8 Soft start

The inverter provides a smooth start, avoiding the high current spikes typical of star-delta starters. This reduces stress on your electrical supply and extends motor life.

Technical Specifications


Model:
JLV-37KW/8KG(8 Bar)
Compression Type
Oil-injected screw
Working Pressure
8 Bar (0.8 Mpa)
Power
37 kW (50 HP)
Drive Type
Integrated permanent magnet with inverter control
Motor and Air End
Baosi
Controller
Inovance CP650
Communication
RS485 and Modbus
Cooling Method
Air-cooled
Radiator Size
780 x 700 x 80 mm
Dimensions (L x W x H)
1500 x 950 x 1230 mm
Starting Mode
Variable frequency soft start

Quality Inspection


Every unit is tested before shipment. The inspection includes:

Electrical safety test: wiring, inverter parameters, and control logic are verified.
Pressure and leak test: the machine runs at maximum pressure to confirm there are no leaks in the piping system.
Performance test: actual working pressure is checked and the integrated Baosi system is run under load.

A test report and the full bill of materials are included with the shipping documents.
Compressor-Testing-1000-4
Compressor-Testing-1000-3
Compressor-Testing-1000-2
Compressor-Testing-1000-4

Packaging and Shipping


The machine is wrapped in anti-moisture film and secured in a plywood export case with steel strapping. This packaging is suitable for ocean freight. We support FOB, CIF, and DDP terms. Send us your nearest seaport and we will provide a shipping quote.
Packaging and Shipping-800-1
Two Stage 250kw Compressor-3
100 m3 2 Stage VSD Screw Air Compressor-800-1

Certificates

ISO 9001 quality management system certification.
CE certification available upon request.
Brand authorization documents for Baosi and Inovance are available for verification.
Certification

Application

Textile and garment manufacturing: consistent air for weaving and dyeing.
Automotive repair and assembly: reliable power for pneumatic tools and paint shops.
Food and beverage packaging: clean air with oil carryover at or below 2ppm.
Electronics and laser cutting: stable air supply for sensitive machinery.
General manufacturing: continuous air for plant-wide pneumatic systems.
Application-750-1

Frequently Asked Questions


What does integrated PM mean?
The permanent magnet motor and the air end are connected directly as one unit. There are no belts or couplings. This means no transmission loss, less vibration, and lower electricity use.
Can I monitor the compressor from a central control room?
Yes. The Inovance CP650 controller supports RS485 and Modbus. You can connect it to your PLC or DCS system to read pressure and temperature, and to start or stop the machine remotely.
Are the Baosi and Inovance components genuine?
Yes. The bill of materials lists the Baosi YNE138RB motor and air end and the Inovance CP650 inverter. You can verify these on delivery.
How much energy does it actually save?

The integrated PM motor with inverter control adjusts power to match your air demand. Compared with a traditional fixed-speed compressor, you can expect meaningful savings on your electricity bill. Actual savings depend on your usage pattern.
What is the oil carryover?
The oil separation system and W962 filter keep oil carryover at or below 2ppm.
Can it run continuously in a hot factory?

Yes. The 780x700x80mm radiator and YWF4D630BC fan are sized for heavy-duty cooling, so the machine maintains stable temperatures even in high ambient conditions.
What are the dimensions?
The enclosure measures 1500 x 950 x 1230 mm.
Is maintenance difficult?
No. The air filter, oil filter, oil separator, and oil sight glass are behind wide-access doors. Routine service is quick and straightforward.
Can you customize the voltage?
Yes. The standard configuration is 380V/50Hz. We can build the machine for 220V, 440V, 460V, or 60Hz to match your local power supply. Contact us with your requirements.
What is the lead time and warranty?

Lead time is typically 15 to 20 working days after deposit. The machine carries a 12-month warranty and lifetime technical support.

Contact Us

To get a quote or discuss voltage and configuration options for your factory, send us a message. We will respond with pricing, lead time, and shipping details.
Please send your message to us
*Email
Phone
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.
Keep in touch